AirGuard 300 Installation Guide

Tools Required:

• Drill
• Screwdriver (appropriate for mounting screws)
• Level
• Measuring tape
• Pencil
• Wrench (if needed for hose clamps)
• Safety glasses
• Gloves

Package Contents:

• AirGuard 300 unit
• Mounting brackets and hardware
• Rubber hose (Single Door or Double Door Kit)
• Hose connectors
• 12V Lithium-ion battery and charger
• User manual

Safety Warnings:

• Always wear safety glasses and gloves during installation.
• Follow all local electrical codes when charging the battery.
• Keep children and pets away from the installation area.
• Do not expose the battery to extreme temperatures or moisture.

Installation Steps:

• Charge the Battery:

• Fully charge the 12V lithium-ion battery before installation according to the instructions in the charger's manual.

• Plan the Layout:

• Determine the mounting location for the AirGuard 300 unit. It can be installed anywhere, as it's cordless.
• Plan the routing of the rubber hose along the doorway or area.
• Ensure the hose will not obstruct the door's movement.

• Mount the AirGuard 300 Unit:

• Use the mounting brackets as a template to mark the screw holes on the wall.
• Use a level to ensure the brackets are straight.
• Drill pilot holes.
• Attach the mounting brackets to the wall.
• Mount the AirGuard 300 unit onto the brackets.

• Connect the Rubber Hose:

• Attach the hose connectors to the AirGuard 300 unit's outlet.
• Attach the rubber hose to the connectors.
• If using the Single Door Kit, route the 8-foot hose along the desired area.
• If using the Double Door Kit, route the 18-foot hose to cover both sides of the door.
• Use hose clamps to secure the hose if necessary.
• Attach the right-angle connector at the bottom of the hose, near the floor.

• Insert the Battery:

• Insert the charged 12V lithium-ion battery into the AirGuard 300 unit.

• Test the System:

• Turn ON the AirGuard 300 unit.
• Adjust the speed control knob to achieve the desired airflow.
• Test the system by opening and closing the door to ensure proper cleaning.

• Final Adjustments:

• Make any necessary adjustments to the hose position or speed control.
• Ensure all connections are secure.

Important Notes:

• The AirGuard 300 is battery-powered, so ensure the battery is charged for operation.
• Follow the battery charging and maintenance instructions in the user manual.